Various offerings provided by Aizyc Technology are listed as follows under four  broad headings:

1. ASIC/SOC
2. System Design
3. Product Engineering
4. Mobile & 3G

I. ASIC/SOC
RTL Design
• Design architecture  
• Define complete system requirements  
• Successful ASIC design for smallest geometry size of 65nm with gate counts up to 100 million and clock domain running up to 700Mhz
• ASIC designs targeted to a wide range of process technologies and libraries
• Competent in ARM based SOC designs  
• Successfully designed  RTL  for various standard and protocols such as 
• PCI, PCIe root complex and peripheral interface,  
• USB 1.1 and 2.0 (Host controllers -EHCI, OHCI, Device Controller, Hub, UTMI,ULPI, USB On-The-Go),  
• Serial – RS232/RS485/RS422
• Parallel – IEEE1284 – SPP, ECP, EPP
• On-Chip interconnects (AMBA, OCP)
• SPI,I2C (master/slave)
• IrDA – SIR, MIR, FIR
• DDR 3 SDRAM interface
• IEEE1394 a/b  
• RTL synthesis for ASIC/FPG
• Static Timing Analysis check and DFT support
• Equivalence check            
• Performance Analysis

Verification
• Building state-of-the-art test benches using 
• Specman
• Vera
• SystemVerilog
• Verilog
• VHDL
• C 
• SystemC  
• Scripting languages (Perl, TCL)

• Develop reusable Verification IP at module and chip level
• Coverage driven Verification (Block, Code, Line, Coverage etc.)
• Assertion based Verification  
• Develop direct as well as constraint driven random verification environment
• Formal Verification  
• Hardware/Software co verification
• Proficient in Verification of ARM based SOCs
• Verification using FPGA platform
• Pre and Post Silicon validation  
• Successful Verification done for  silicon proven IPs for various industrial applications such as  
• PC peripherals – USB, PCI, PCIe, IDE/SATA
• Wireless devices
• Consumer portables
• Flash Memory based devices
• Storage devices

FPGA Design
• Proof of concept Designs/Demo systems in lighting controls, home automation, wireless & DSP
• FPGA prototyping for various ASIC designs  
• Retarget Services – FPGA-to-FPGA, FPGA-to-ASIC, ASIC-to-FPGA
• Design partitioning onto multiple FPGAs (1-15)
• Complete SOC Porting on FPGA
• Full functional verification and interoperability tests on FPGA platform
• Expertise in Virtex 5, Stratix II and Xilinx XCVP20 series FPGA with Rocket I/O.

II. System Design
Board Design Services
• FCC (US), TUV(European) and CE (European) certified for electronics design
• Architecture Specification
• Component selection, BOM analysis and optimization
• Complex Schematic designs involving audio/video, PCIe, DDR3, XAUI, HDMI, USB3.0, SD3.0 and several high speed interfaces
• Schematic Capture (OrCAD)
• Pre layout SI/PI analysis
• Layout (Allegro)
• Post layout SI/PI analysis
• Board Manufacture
• Assemble and bring-up
• Functional testing of prototype
• PCB layout and FAB signoff involving micro & Buried vias
• DFX Analysis
• Design of silicon validation board
Physical design
• Expertise in Multi-clock designs and low power designs
• Place and Route  
• Timing closure  
• Layout and formal verification
• Sign off analysis for Power, IR drop, STA with OCV(On chip Variation) and MMC (Multimode
Mode Multi Corner)
• Cross talk analysis
• ATPG Simulation
• ASIC layout migration
• Experience on numerous EDA tool flows
FPGA Prototyping
• FPGA board design for Proof of concept
• FPGA board design
• ASIC validation/prototyping boards for prototyping RTL design

III. Product Engineering
• Router
• Firewall
• VPN
• USB server
• NAS
• Serial Server
• Video Surveillance
• Home GW
• M2M devices

• BSP development for embedded platform
• Experience in vast range of processor families  such as MIPS, x86, Marvell, PXA3xx and many others
• Proficient in embedded Linux on ARM platforms targeting home automation and media conversion
• Competent in developing drivers for Embedded OS such as VxWorks, QnX, WinCE, Linux, Symbian, ThreadX, Nucleus and many more.
• Developed drivers for peripherals with  I/O Interfaces such as I2C, USB,SPI, UART, IrDA, IEEE1284, IEEE 1394, IDE, Ethernet, PCIe, SATA, USB, SD3.0 
• Memory foot print optimization

IV. Mobile & 3G